As an Amazon Associate I earn from qualifying purchases.
Willsenton r8 is an integrated amplifier, it is a Power Amplifier too there is a group Power amp input, it is a Headphones amp too.

Eq mode - built-in 7 kinds of eq mode presets, more functions. Unparalleled power efficiency - optimized for music playback with very low power losses and cool operation. Personalized adjustment, and you can also connect the active bass output.
Wireless whole-home audio - play your favorite music wirelessly throughout your home for a seamless. Ultra compact, fully integrated solution - high power output in a small form factor. Ma12070 chip - the ma12070 is a super-efficient audio power amplifier based on proprietary multi-level switching technology. You can buy the adapter yourself to connect mobile phones, computer and other devices. Because of the complexity of phone models, we don’t guarantee that all phones can be connected.

18 db / octave high-pass filter, switchable 20 Hz or 40 Hz. Continuous rms power output 20 hz - 20 khz, both channels driven: 150 watts x 2, 4 ohms; 225 watts x 2, 8 ohms; 225 watts x 2, 2 ohms.



Endless connection possibilities – includes a pre-amp output so you can connect a larger power amplifier or use the power amp input for integration into a multi-channel home theater system.
Included headphone output gives you full control of the headphone unit so you can enjOY THE BEST QUALITY MUSIC FROM THE MOST DEMANDING HEADPHONES, without disturbing others. Brilliant music quality & flexible operations – 6 audio inputs, 70 watts per channel 70 x 2 make it suitable for producing and filling big rooms with rich sound. You can also add two high quality speakers in a second room.

It warms up the heaters first and then, brings up the SS rails and tube HV, after a short delay, protecting the internal circuitry during startup.
Keeps its cool. You're protected. The liquid platinum has a built-in, slow power on. Spectacular sound. Luminous tubes. It also includes a connection delay to the headphones and an active offset detector, just in case an internal fault or source fault applies too much DC voltage to the output, it immediately disconnects your headphones.

Continuous rms power output 20 hz – 20 khz, 8 ohms; 200 watts, Bridged Mono: 200 watts, 4 ohms.18 db / octave high-pass filter, switchable 20 Hz or 40 Hz, Fully discrete circuitry with toroid transfer, efficient, low heat design.
Dc servo and relay protection circuits, Automatic on/off by DC trigger with looping output. Two channel amplifier, updated front and rear cosmetics, New A/B speaker button lockout switch on the rear panel. Continuous rms power output 20 hz - 20 khz, both channels driven: 90 watts x 2, 8 ohms; 150 watts x 2, 4 ohms; 120 watts x 2, 2 ohms.

Embedded with hifiman himalaya r2r dac- recipient of 2022 VGP Gold Technology Award Japan.
4-level function switch: high gain nos, low gain os, high gain os, low gain nos headphone out front panel: 6.35mm single-ended; 3. 5mm single-ended; 4. 4mm balanced; xlR 4-Pin Balanced Output. The four-channel fully differential amplifier circuit features a maximum output of 107 vrms thd
1. Willsenton
#ad
Willsenton R8 KT88/EL34 x4 Tube Integrated AMP Power Amplifier Headphone Black
#adWillsenton #ad - The default matching tubes of this machine is KT88. If you need another 2 new sets of tubes, so, please purchase in addition. With a remote control, Vacuum tube protective cover, Fuse and an English manual.Willsenton r8 is an integrated amplifier, it is a Power Amplifier too there is a group Power amp input, it is a Headphones amp too.
More information #ad
There is a red selection button on the Back of the amp to switch. One amplifier can used wiht tube el34, kt88 or 6550, you can get 3 kinds of sound from different models tubes. Triode and ultra-linear selection are available which can be switched by the button on the amplifier. Pure hand-made, Point to point manual welding.Brand | Willsenton #ad |
Manufacturer | Willsenton #ad |
Height | 20.08 Inches |
Length | 19.69 Inches |
Width | 11.81 Inches |
Part Number | Willsenton R8 KT88 |
Model | Willsenton R8 |
More information #ad
2. LOXJIE
#ad
Infineon's MA12070 Chip Class D Amp, USB/ Optical/ Coaxial/ RCA/ Bluetooth 5.0 Input with Remote Control, ES9023 DAC Chip, LOXJIE A30 Desktop Stereo HiFi Audio Power Amplifier & Headphone Amplifier
#adLOXJIE #ad - Bluetooth 5. 0 digital audio input, support APT-X. The power management algo-rithm dynamically adjusts switching frequency and modulation to optimize power loss and EMI across the output power range. Connect usb for more music at your fingertips - 32bit/384khz usb audio input, tablets, and supports driver-free use.Eq mode - built-in 7 kinds of eq mode presets, more functions. Unparalleled power efficiency - optimized for music playback with very low power losses and cool operation. Personalized adjustment, and you can also connect the active bass output.
More information #ad
High quality headphone output - along with 6. 35mm headphone jack and 4mm banana output interface Audio cable may be directly connected without connectors through the remote control “mode” key, freely switch the output mode. Wireless whole-home audio - play your favorite music wirelessly throughout your home for a seamless. Ultra compact, fully integrated solution - high power output in a small form factor. Ma12070 chip - the ma12070 is a super-efficient audio power amplifier based on proprietary multi-level switching technology. You can buy the adapter yourself to connect mobile phones, computer and other devices. Because of the complexity of phone models, we don’t guarantee that all phones can be connected.
Brand | LOXJIE #ad |
Manufacturer | LOXJIE #ad |
Part Number | A30 |
Model | A30 |
More information #ad
3. Parasound
#ad
Parasound 2125v2 150 Watt Stereo Power Amplifier
#adParasound #ad - Dimensions: 17-1/4" wide, 16" deep, 3-1/2" panel only, with connectors 4-1/4" tall with feet, Net Weight: 27 lbs. Frequency response: 20 hz - 50 kHz, +0/-3 dB, 1 watt. Two-channel thx ultra2 certified power amplifier, Fully discrete circuitry with toroid transfer, Efficient, low heat design.18 db / octave high-pass filter, switchable 20 Hz or 40 Hz. Continuous rms power output 20 hz - 20 khz, both channels driven: 150 watts x 2, 4 ohms; 225 watts x 2, 8 ohms; 225 watts x 2, 2 ohms.
More information #ad
Standby, channel status, high temperature indicators. Gold-plated rca input jacks, loop output jacks, Heavy duty 24K gold-plated five-way speaker terminals. 115 v / 230 v selector on rear panel. Automatic on/off by DC trigger with looping output, Automatic on/off by audio signal. Impedance selector switch for 2W operation, Bridging switch for stereo or mono operation.Brand | Parasound #ad |
Manufacturer | Parasound #ad |
Height | 9 Inches |
Length | 22 Inches |
Weight | 27 Pounds |
Width | 19 Inches |
Part Number | Classic 2125 |
Model | Parasound 2125v2 |
More information #ad
4. Parasound
#ad
Parasound Model 2250 v.2 Two Channel Power Amplifier
#adParasound #ad - Standby, channel status, high temperature indicators. Two-channel thx ultra2 Certified power amplifier, Efficient, low heat design. Automatic on/off by dc trigger with looping output, 115 V / 230 V selector on rear panel.More information #ad
Specifications power output – RMS power, 20 Hz – 20 kHz. All channels driven 275 watts x 2, 4Ω 400 watts x 2, 8Ω 400 watts x 2, 2Ω Load switch set to 2-3Ω.Brand | Parasound #ad |
Manufacturer | Parasound #ad |
Height | 6 Inches |
Length | 16 Inches |
Weight | 43 Pounds |
Width | 17.25 Inches |
Part Number | Classic 2250 |
Model | Classic 2250 |
More information #ad
5. Vincent
#ad
Silver, Vincent Audio SV 200 Hybrid Integrated Amplifier
#adVincent #ad - Inputs: 2 x stereo rca, 1 x stereo pre out, 1 x coax - outputs: 1 x Stereo Rec Out, 2 x 2 speaker terminals, 1 x optical, 2 x Power Control 3.5 mm jack. Playable digital formats: wav, flac, MP3, ape, lpcm, ACC, AC3, WMA.More information #ad
Audiophile integrated amplifier with a hybrid circuit design. Vacuum tube input stage and solid state output stage. Built-in daC and oversize toroidal transformer.Brand | Vincent #ad |
Manufacturer | Vincent #ad |
Weight | 13.5 Pounds |
Part Number | SV-200 |
More information #ad
6. Marantz
#ad
Marantz PM8006 Integrated Amplifier with New Electric Volume Control and Phono-EQ for Vinyl Playback | Connect Multiple Audio Sources | Flexible Configurations for More Power to Speakers
#adMarantz #ad - Lower audio distortion & improved clarity – enjoy the best playback from all your music sources – digital or analog – from CDs to turntables to streaming, with high volume control & Marantz’ Musical Phono EQ two-stage amplification for detailed sound.Endless connection possibilities – includes a pre-amp output so you can connect a larger power amplifier or use the power amp input for integration into a multi-channel home theater system.
More information #ad
High quality components inside out – proprietary marantz high-grade hyper-dynamic amplifier Modules HDAMs and newly designed electric volume circuit to match Super Audio hi-res music for wide-bandwidth & high-speed reproduction. Included headphone output gives you full control of the headphone unit so you can enjOY THE BEST QUALITY MUSIC FROM THE MOST DEMANDING HEADPHONES, without disturbing others. Brilliant music quality & flexible operations – 6 audio inputs, 70 watts per channel 70 x 2 make it suitable for producing and filling big rooms with rich sound. You can also add two high quality speakers in a second room.
Brand | Marantz #ad |
Manufacturer | Marantz #ad |
Height | 5.03 Inches |
Length | 14.92 Inches |
Weight | 26.46 Pounds |
Width | 17.32 Inches |
Part Number | PM8006 |
Model | PM8006 |
Warranty | 3 years |
More information #ad
7. Monolith
#ad
Designed by Alex Cavalli | 3.6 Watts Per Channel, Fully Balanced Amp, Monolith Liquid Platinum Headphone Amplifier
#adMonolith #ad - The platinum is ventilated with two long, screened slots on either side of the top and large screens on the bottom to ensure that it is well cooled. Single ended and balanced inputs and outputs: with multiple inputs and outputs for balanced and single ended operation and easy front panel input selection, the Liquid Platinum is compatible with just about everything.It warms up the heaters first and then, brings up the SS rails and tube HV, after a short delay, protecting the internal circuitry during startup.
More information #ad
The power of solid state. Ensure your amplifier has enough space around the vents and is not in a sealed enclosure. It uses two 6922 tubes or exact equivalents, such as 6DJ8s. As an embedded tube/hybrid amplifier dc coupled in to out, no coupling caps, the Liquid Platinum gives you the beautiful sound of tubes together with the grunt of solid state circuitry to drive the headphones. Keeps its cool. You're protected. The liquid platinum has a built-in, slow power on. Spectacular sound. Luminous tubes. It also includes a connection delay to the headphones and an active offset detector, just in case an internal fault or source fault applies too much DC voltage to the output, it immediately disconnects your headphones.
Brand | Monolith #ad |
Manufacturer | Monoprice #ad |
Height | 3.3 Inches |
Length | 15.5 Inches |
Weight | 0.32 Pounds |
Width | 11.5 Inches |
Part Number | 133305 |
Model | 133305 |
Warranty | 1 |
More information #ad
8. Parasound
#ad
Parasound 275v2 90 Watt Stereo Power Amplifier
#adParasound #ad - Impedance selector switch for 2W operation, Bridging switch for stereo or mono operation. Gold-plated rca input jacks, loop output jacks, Heavy duty 24K gold-plated five-way speaker terminals. Frequency response: 20 hz - 50 kHz, +0/-3 dB, 1 watt.Continuous rms power output 20 hz – 20 khz, 8 ohms; 200 watts, Bridged Mono: 200 watts, 4 ohms.18 db / octave high-pass filter, switchable 20 Hz or 40 Hz, Fully discrete circuitry with toroid transfer, efficient, low heat design.
More information #ad
115 v / 230 v selector on rear panel, Standby, channel status, high temperature indicators. Dimensions: 17-1/4" wide, 16" deep, with connectors 2-1/2" tall with feet, 1-1/4" panel only, Net Weight: 21 lbs. Dc servo and relay protection circuits, Automatic on/off by DC trigger with looping output. Two channel amplifier, updated front and rear cosmetics, New A/B speaker button lockout switch on the rear panel. Continuous rms power output 20 hz - 20 khz, both channels driven: 90 watts x 2, 8 ohms; 150 watts x 2, 4 ohms; 120 watts x 2, 2 ohms.
Brand | Parasound #ad |
Manufacturer | Parasound #ad |
Height | 2.5 Inches |
Length | 16 Inches |
Weight | 21.16 Pounds |
Width | 17.25 Inches |
Part Number | 1 |
Model | Parasound Classic 275 |
More information #ad
9. HIFIMAN
#ad
HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio
#adHIFIMAN #ad - The combinations of its low audio frequency range, and low energy consumption make it a perfect match for high-performance audio equipment. Full balance: the four-channel differential structure features a dac, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier.Embedded with hifiman himalaya r2r dac- recipient of 2022 VGP Gold Technology Award Japan.
More information #ad
The himalaya dac module supports the standard pcm music signal transmitted by the most common IIS Integrated Interface of Sound audio interface, out-of-band noise, with a maximum resolution of 24Bit. 4-level function switch: high gain nos, low gain os, high gain os, low gain nos headphone out front panel: 6.35mm single-ended; 3. 5mm single-ended; 4. 4mm balanced; xlR 4-Pin Balanced Output. The four-channel fully differential amplifier circuit features a maximum output of 107 vrms thd
Brand | HIFIMAN #ad |
Manufacturer | HIFIMAN #ad |
Height | 2.4 Inches |
Length | 9.69 Inches |
Weight | 6.79 Pounds |
Width | 8.98 Inches |
Part Number | EF400 |
More information #ad