As an Amazon Associate I earn from qualifying purchases.








Medium contact resistance micro ohm: 140 Isolation resistant to test voltage AC / DC Volts: 2200V. Auto-erasure makes the surface of the push needle clean, the low contact resistance is reliable. Stainless steel shrapnel can ensure constant contact stress and overcomes intermittent overload in case of frequent splicing and interruption.
No load contact / disconnect cycles: at 10, 000 Under load hot plug 250 cycles @ 120v. Minimum insertion force pounds: 20lbf. Operating temperature ° C: -20 ° to 105 °. Flammability class of the housing material: UL 94-V0 Good material: the product is made from good materials, the continuity is perfect, the resistance to bad environment.
1. Valley Enterprises
#ad
Valley Enterprises Anderson Powerpole 75 Amp Contact 5915 for 10 Gauge Wire Bulk Pack of 10
#adValley Enterprises #ad - For use with 10 Gauge Wire. Pack of 10 . Used with the 75 amp powerpole housings and with the SB Series 50 Amp housings. Anderson powerpole 75 Amp Contact Housings not included. Genuine Anderson Powerpole Connectors.More information #ad
Brand | Valley Enterprises #ad |
Manufacturer | Anderson Powerpole #ad |
More information #ad
2. Valley Enterprises
#ad
Valley Enterprises Anderson Powerpole 75 Amp Contact 5952 for 8 Gauge Wire Bulk Pack of 10
#adValley Enterprises #ad - Genuine Anderson Powerpole Connectors. Used with the 75 amp powerpole housings and with the SB Series 50 Amp housings. For use with 8 Gauge Wire. Pack of 10 Anderson powerpole 75 Amp Contact Housings not included.More information #ad
Brand | Valley Enterprises #ad |
Manufacturer | Anderson Powerpole #ad |
More information #ad
3. Powerwerx
#ad
10 Sets, Powerwerx PP45-10 45 Amp Unassembled Red/Black Anderson Powerpole Connectors
#adPowerwerx #ad - Powerpole connectors use a stainless steel spring which applies 25 lbs. Unassembled sets can be assembled in any configuration. Recommended for use with 10 gauge wire.More information #ad
Of pressure to hold the silver-plated copper contacts firmly together and maintain constant contact. The powerpole insulated housings use a durable, high impact-resistant, high temperature polycarbonate plastic.Brand | Powerwerx #ad |
Manufacturer | Powerwerx #ad |
Weight | 0.15 Pounds |
Part Number | PP45-10 |
Model | PP45-10 |
More information #ad
4. Valley Enterprises
#ad
Valley Enterprises Crimping Tool Compatible with Anderson Powerpole 75 AMP and SB50 SB Series Connectors
#adValley Enterprises #ad - Also works with large solderless terminals. Recommended for 6 and 8 gauge contact. Crimping tool compatible with 75 amp anderson Powerpole connectors and 50 AMP SB Series contact numbers 5900 and 5952. Use the middle 4-6mm die position for both contacts.More information #ad
Brand | Valley Enterprises #ad |
Manufacturer | Valley Enterprises #ad |
Part Number | CT-75 |
Model | CT-75 |
More information #ad
5. Valley Enterprises
#ad
Valley Enterprises Anderson Powerpole 75 Amp Contact 5900 for 6 Gauge Wire Bulk Pack of 10
#adValley Enterprises #ad - For use with 6 Gauge Wire. Used with the 75 amp powerpole housings and with the SB Series 50 Amp housings. Anderson powerpole 75 amp Contact - Pack of 10 Housings not included. Genuine Anderson Powerpole Connectors.More information #ad
Brand | Valley Enterprises #ad |
Manufacturer | Anderson Powerpole #ad |
Weight | 0 Pounds |
Part Number | 5900 |
More information #ad
6. Valley Enterprises
#ad
Valley Enterprises Powerwerx 75AMP Input 4 Position Power Distribution Block for use with Anderson Powerpole Connectors 15/30/45 Amp PD-75
#adValley Enterprises #ad - Allows each output to use a retention clip for secure operation. Thick copper bus bar construction. Mountable for permanent installations.More information #ad
75amp anderson powerpole input accepts 6 or 8 GA wire. Genuine Anderson Powerpole Connectors. Distributes power to 4 positions of 15/30/45 Amp Anderson Powerpole Connectors.Brand | Valley Enterprises #ad |
Manufacturer | Powerwerx #ad |
Part Number | PD-75 |
Model | PD-75 |
More information #ad
7. Anderson Powerpole Connectors
#ad
Anderson Powerpole Connectors 10 Pair Genuine
#adAnderson Powerpole Connectors #ad - Silver has the lowest electrical resistance of any metal followed by copper and then gold. Anderson power pole connectors 10 pairs: 10 red housings, 10 black housings, 20 silver plated copper contacts.More information #ad
Brand | Anderson Powerpole Connectors #ad |
Manufacturer | Anderson Power Products #ad |
Height | 0.1 Inches |
Length | 5.8 Inches |
Weight | 0.02 Pounds |
Width | 3 Inches |
Part Number | AP0001 |
Model | 1327 1327G6 1331 |
More information #ad
8. APP (Anderson Power Products)
#ad
Anderson Power Products SB50 Connector Kit, w/ 6 AWG, 50 Amps, 36V Gray Housing, 6319 Pair
#adAPP (Anderson Power Products) #ad - Standard temp: -20°c to 105°c -4°C to 221°C. Anderson powerpole Connectors Made in USA. Recommended for use with 6 gauge wire. Heavy duty contact amp Rating: 50A, 600V. Connector housing, Amp Rating: 120A.More information #ad
Brand | APP (Anderson Power Products) #ad |
Manufacturer | APP (Anderson Power Products) #ad |
Part Number | 6319 ( 2 Set) |
More information #ad
9. Dent-de-lion
#ad
120A Battery Connector Quick Connect Battery Modular Power Connectors Quick Disconnect Grey
#adDent-de-lion #ad - Package included: all is included in the first picture. Material: silver copper. Rated currents amps: 120 a. Rated voltage rating: 600 v. Contact barrel wire size awG: 2/4 / 6AWG 1 3. 3 mm² - 21. 1 / 33. 6mm².Medium contact resistance micro ohm: 140 Isolation resistant to test voltage AC / DC Volts: 2200V. Auto-erasure makes the surface of the push needle clean, the low contact resistance is reliable. Stainless steel shrapnel can ensure constant contact stress and overcomes intermittent overload in case of frequent splicing and interruption.
More information #ad
Contact retention force lbf: 100lbf. The connector can be used in a strong shock environment and with the fast action function in a large electric current. No load contact / disconnect cycles: at 10, 000 Under load hot plug 250 cycles @ 120v. Minimum insertion force pounds: 20lbf. Operating temperature ° C: -20 ° to 105 °. Flammability class of the housing material: UL 94-V0 Good material: the product is made from good materials, the continuity is perfect, the resistance to bad environment.
Brand | Dent-de-lion #ad |
Manufacturer | Dent-de-lion #ad |
Height | 0.79 Inches |
Length | 2.48 Inches |
Width | 1.73 Inches |
Part Number | Dent-de-lion120a |
Model | Dent-de-lion120a |
More information #ad