Top 10 Raspberry Pi 4 ICE Tower Case – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. GeeekPi

#ad

GeeekPi Mini Tower UPS Kit, Raspberry Pi UPS Plus Hat, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

#ad
GeeekPi #ad - In the case of overclocking, 7 blades powerful fan, 5mm copper tube, multi-layer heat sinks, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. Tower structure, all the above combinations make this super radiator for Raspberry Pi. The fan on super ice tower cooler upgraded to pwm rgb fan.

Support raspberry pi 4 model b only; support OLED display, UPS Plus integration, ICE Tower Cooler integration. It can display the running status of raspberry pi or ups Plus through programming, CUP load, disk utilization, such as Raspberry Pi’s IP address, CPU temperature, memory status and other system information. It also can power raspberry Pi via Pogo Pins without using any GPIO resources. The ups plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free.

The 096 inch oled screen was already mounted on the case. Package includes: 1 x abs mini tower case, 1x gpio edge extention, 1 x 096 inch oled displayalready mounted on the case, 2 x acrylic side panel, 1 x ICE Tower Cooler, 1 x UPS Plus Hat, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad

2. GeeekPi

#ad

Raspberry Pi 4 Case with ICE Tower Cooler, Raspberry Pi Heatsink, GPIO Expansion Board for Raspberry Pi 4B, GeeekPi Raspberry Pi Mini Tower Kit with QC3.0 Power Supply, RGB Fan, 0.96'' OLED Module

#ad
GeeekPi #ad - The screen holder is easy to assemble or disassemble and the interior of the case includes a design for arranging cables, Memory Status, Network Card Traffic and other system information. The lights on the ice Tower Cooler will change with the lights on the driver board. There are rgb three-color programmable LED moon lights on the screen driver board, and you can adjust the color of the light according to your own preferences.

Package includes: 1 x abS Mini Tower Case, 1x QC3. 0 power supply, 1x assembly manual Note: Raspberry Pi 4B is Not included in the package. It’s access to usb-c power port, 2 USB 2. 0 ports, gigabit Ethernet port, 2 USB 3. 0 ports, two micro hdmi ports, SD card slot, GPIO port. All are good for heat dissipation of Raspberry Pi Board. Ice tower cooler – the ice tower cooler includes a 40mm pwm fan. The screen driver board contains RGB three-color programmable LED ambient light, CPU temperature, the contents shown on screen can be varied.

Note: the rgb lights on fan and mood lights on oled screen driver board will not light up unless installed driver, 2 x acrylic side panel, 1x gpio edge extention, 1 x 0.96 inch oled display already mounted on the case, 1 x ice Tower Cooler, and OLED will not display any information until you have enabled it! Please read the manual carefully and follow the steps to enable it. Better heat dissipation – the ice tower cooler is made from 5mm copper tube and 28 aluminum fins and it also has a 40mm cooling fan.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Weight0.94 Pounds

3. GeeekPi

#ad

Raspberry Pi 4B Case with Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Horizontal ICE Tower Cooler Silver, GeeekPi Raspberry Pi 4 Metal Case with Fan

#ad
GeeekPi #ad - Raspberry pi low-profile cpu cooler kit for raspberry Pi 4 Model B;Black Version, please refer to ASIN: B08CVDRCKT. 5mm copper tube;super heat dissipation;Plug and play;Rated power 04w @5v, 008a.

Metal case features:it not only provides good protection to your Raspberry Pi and also offering excelent heat dissipation. Only case, please refer to ASIN: B085HFTMB1. Fan features: color led fan with automatic color change;single-stack tower-style heatsink;DC 5V Power in Can be powered by the Raspberry Pi;Only Fan, please refer to ASIN: B07ZV1LLWK. Package includes: 1 x metal case, 1 x screwdriver, 1x 40-pin gpio 1 to 2 Expansion Board, 1 x ice tower cooler, 1 x Instructions; Note: Raspberry Pi Board is Not Included.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberK-0522

4. ElectroCookie

#ad

ElectroCookie Raspberry Pi 4 Case, Aluminum Mini Tower Case with Cooling Fan and Color Changing Ambient Light Matte Black & Dark Gray

#ad
ElectroCookie #ad - Effective cpu cooling system with Large Heatsink and 4000rpm Fan. Color changing rgb Mood Light with Adjustable Brightness Controller. Miniature desktop style case for Raspberry Pi 4B Not Compatible with Pi 3. Matte black aluminum Body and Transparent Dark Gray Acrylic Cover. Low noise 17dba cooling Fan for Quite Work Environment.
BrandElectroCookie #ad
ManufacturerElectroCookie #ad
Height2.44 Inches
Length3.86 Inches
Weight0.62 Pounds
Width3.86 Inches
Part NumberRaspi DT Case_Neon

5. GeeekPi

#ad

M.2 SATA SSD Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B, GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, GPIO 1 to 2 Expansion Board

#ad
GeeekPi #ad - The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host. M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2. Package includes: 1 x abs mini tower case, 1 x gpio edge expansion board, 2 x acrylic side panel, 1 x m.

2 sata ssd shield, 1 x 096inch oled display already mounted on the case, 1 x QC 3. 0 power supply, 1 x ice-tower cpu cooling fan, 1 x Assembly manualNote: Raspberry Pi 4B is Not included in the package. Sata ssd solid-state drive. This raspberry pi mini tower nas kit contains an m. 2 sata ssd expansion board which can expand the mass storage for your Raspberry Pi.

Note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! The 096 inch oled screen was already mounted on the case. 28x64pixels, default I2C address: 0x3C.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Weight0.79 Pounds
Part NumberK-0612-EU

6. GeeekPi

#ad

GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

#ad
GeeekPi #ad - Rated power 04w @5v, 008a;dc 5v power in Can be powered by the Raspberry Pi. Ice tower structure;easy to setup; raspberry Pi 4 Case with ICE Tower Fan: B07ZCX5KG6. 5mm copper tube;Super heat dissipation. Super cool fan background light Multicolor.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberEP-0107
ModelUYH6

7. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Case with ICE Tower Cooler CPU Cooling Fan,Raspberry Pi 4 Case with Fan Raspberry Pi Heatsink Raspberry Pi Fan Raspberry Pi Case for Raspberry Pi 4 Model B

#ad
GeeekPi #ad - Ice tower Structure;Easy to setup. Super cool fan background light. Package includes:1 x 5-layer acrylic case, 1 x ice tower radiator and Fan, 1 x mini screw driver, 1 x 4010 Fan kitscrews and nuts, 1 x Anti-slipper pads, 2 x steel mounting fixer, 2 x M2.0 screws. Only for raspberry Pi 4 Model B.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberK-0401

8. GeeekPi

#ad

Raspberry Pi 4 Case with Fan Raspberry Pi Heatsink Raspberry Pi Fan Raspberry Pi Case for Raspberry Pi 4 Model B, GeeekPi Raspberry Pi 4 Case with Raspberry Pi ICE Tower Fan RGB Cooling Fan

#ad
GeeekPi #ad - Super cool fan background light Multicolor. Only for raspberry Pi 4 Model B. Package includes:1 x 5-layer acrylic case, 1 x anti-slipper pads, 1 x Ice Tower radiator and Fan, 2 x Steel Mounting Fixer, 1 x 4010 fan kitscrews and nuts, 1 x mini screw driver, 2 x M2.0 screws. Ice tower Structure;Easy to setup. Rated power 04w @5v, 008a;dc 5v power in Can be powered by the Raspberry Pi.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberK-0503

9. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Metal Case,Raspberry Pi 4B Case for Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Case for RPi Horizontal ICE Tower Cooler Pi and Fan NOT Included

#ad
GeeekPi #ad - Access to all ports and slots of raspberry Pi, including SD card slot, USB ports, GPIO port, HDMI port and so on. Very easy to set up -only for Raspberry Pi 4 Model B. It not only provides good protection to your Raspberry Pi and also offering excelent heat dissipation. Only for raspberry pi low-profile cpu cooler, please refer to asin:b07zv1llwk;case with Fan, Raspberry Pi Horizontal ICE Tower Cooler, please refer to asin b086ktmzlx;case with power supply, please refer to ASIN:B09R1M9YCZ. Note: raspberry pi board and Low-Profile CPU Cooler are Not Included.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0087
ModelZP-0087

10. GeeekPi

#ad

0.96'' OLED Module, Raspberry Pi Heatsink,GPIO 1 to 2 Expansion Boardfor Raspberry Pi 4B, Raspberry Pi 4 Case with ICE Tower Cooler, RGB Cooling Fan, GeeekPi Raspberry Pi Mini Tower Kit

#ad
GeeekPi #ad - Only compatible with raspberry pi 4b. For 3b+/3b version, please refer to ASIN: B0B81G6FPC. The screen holder adopts a quick-release design, and the interior of the shell includes a design for arranging cables, with very high precision, which is convenient for arranging cables.

Abs mini tower case is made of abs material, and the 45-degree oled screen display angle is more convenient to observe system information. The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs. Package includes: 1 x abs mini tower case, 2 x acrylic side panel, 1x gpio edge extention, 1 x 0.9

96 inch oled displayalready mounted on the case, 1 x ICE Tower Cooler, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package. The ice tower radiator included in the kit can not only provide good heat dissipation, but also increase the appearance. The interface adopts with a fool-proof design to avoid problems caused by wrong wiring, the installation is simpler and more convenient.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Warrantyno