Top 10 Ham It Up – Electronics

As an Amazon Associate I earn from qualifying purchases.

1. NooElec

#ad

HF/MF/LF/VLF/ULF Upconverter w/TCXO, Ham It Up Plus

#ad
NooElec #ad - Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately.

Includes sma to sma connector to attach the output to your radio, black, aluminum enclosure, and an SMA to BNC antenna adapter. Proudly made in the usa and Canada! Full 2 year product warranty, directly through Nooelec. The ham it up plus is fully assembled in a custom, tested, and ready to use. A separate noise source circuit is included for testing and calibration of various RF devices. A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.79 Inches
Length5.12 Inches
Weight0.29 Pounds
Width2.36 Inches
Part Number100769
ModelHam It Up Plus

2. NooElec

#ad

MF & LF Upconverter w/TCXO. Extends The Frequency Range of Your Favorite RTL-SDR or Radio Down to 100kHz. Includes Aluminum Enclosure & Accessories. Made in USA!, Ham It Up Nano, Tiny HF

#ad
NooElec #ad - Ham it up nano is a highly portable hf upconverter for radios and software defined radio devices like our NESDR series RTL-SDR and the HackRF. Product datasheet: http://www. Nooelec. Com/datasheets/100825. Wide frequency capability of 100khz-65MHz, and bias-tee powerable! Small, 1PPM accuracy, light-weight module--just 2.0" x 1. 2" x 075" 50 x 30 x 18mm and 1. 6oz 45g. Full 2 year warranty direct through Nooelec.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.79 Inches
Length3.15 Inches
Weight45 Grams
Width1.18 Inches
Part Number100825
ModelHam It Up Nano
Warranty2 Year Warranty

3. NooElec

#ad

Adapters, Nooelec NESDR Smart HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for HF/UHF/VHF Including RTL-SDR, Assembled Ham It Up Upconverter, Balun

#ad
NooElec #ad - Please contact our support team any time if you have questions! Amazon-exclusive bundle! only available for a limited time. Included is a ham it up v1. 3 upconverter, installed in a custom black aluminum enclosure; an NESDR SMArt RTL-SDR, an impedance matching balun for longwire and dipole antennas, 3 antennas, and interconnect adapters.

Proudly manufactured by nooelec in the usa and canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. The nesdr smart hf bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks.

This results in a vastly different HF experience--much better performance, and no loss of gain controls. A full, wide-band rf solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Note: enclosure colors may vary contingent on availability.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height1.57 Inches
Length11.81 Inches
Weight0.71 Pounds
Width9.06 Inches
Part Number100764
ModelNooElec NESDR SMArt HF Bundle

4. NooElec

#ad

FC0013 or R820T Tuners; MF/HF Converter with SMA Jacks, Ham It Up v1.3 Barebones, Nooelec RF Upconverter for Software Defined Radio. Works with Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000

#ad
NooElec #ad - Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Listen to all hf, with nearly any software defined radio!listen to ALL HF, down to 100kHz and below, down to 100kHz and below, with nearly any software defined radio! Massively improved performance vs.

Any direct sampling hacks and implementations. Also available in a 'plus' version, which includes a tcxo and frequency capability down to 300Hz. Open-hardware design with full documentation available. Proudly made in the usa and Canada with high-quality components! Full 1 year warranty, direct through Nooelec. Datasheet: https://www. Nooelec. Com/datasheets/100555. Product name: ham it up plus barebones, Amazon SKU: B076CYH6NL.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.39 Inches
Length6.69 Inches
Weight0.09 Pounds
Width4.72 Inches
Part Number100555
ModelHam It Up

5. NooElec

#ad

Balun, Adapters, 3 Antennas, NooElec NESDR Smart XTR HF Bundle: 300Hz-2.3GHz Software Defined Radio Set for LF/HF/UHF/VHF. Includes NESDR Smart XTR RTL-SDR, Ham It Up Plus Upconverter

#ad
NooElec #ad - Please contact our support team any time if you have questions at support. Nooelec. Com! amazon-exclusive bundle! only available for a limited time. Instead try our nesdr smart hf bundle Amazon product code B0747PX3NZ. Included is a ham it up plus upconverter, 3 antennas, an impedance matching balun for longwire and dipole antennas, installed in a custom silver aluminum enclosure with fully build noise source circuit; an NESDR SMArt XTR RTL-SDR, and interconnect adapters and cables.

A full, wide-band rf solution for those interested in getting started with software defined radio and with a keen interest in HF bands. This results in a vastly different HF experience--much better performance, and no loss of gain controls.

Proudly manufactured by nooelec in the usa and canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. Frequency range is 300Hz-2. 3ghz with a frequency gap near 1. 1ghz. Due to the frequency gap this is NOT recommended for ADS-B. The nesdr smart xtr hf bundle utilizes a well-designed upconverter--the ham it up plus--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.79 Inches
Length4.72 Inches
Weight0.75 Pounds
Width3.54 Inches
Part Number100794
ModelNESDR SMArt XTR HF Bundle

6. NooElec

#ad

HF/MF/LF/VLF/ULF Upconverter w/TCXO & Separate Noise Source Circuit. Extends The Frequency Range of Your Favorite Radio Down to 300Hz. Made in USA., Ham It Up Plus Barebones

#ad
NooElec #ad - Separate noise source circuit is included for testing and calibration of various RF devices. Ham it up will also work as a panadapter for most radios and can be used for both receiving and transmitting.

Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately. A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz. Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec.
BrandNooElec #ad
ManufacturerNooElec Inc. #ad
Height0.39 Inches
Length4.72 Inches
Weight0.09 Pounds
Width1.97 Inches
Part Number100721
ModelHam It Up Plus Barebones

7. NooElec

#ad

NooElec Extruded Aluminum Enclosure Kit, Black, for Ham It Up Plus Barebones RF Upconverter for NESDR and RTL-SDR radios

#ad
NooElec #ad - Comes with all hardware required for finished assembly, including color-matched screws and rubber feet for non-slip usage. Impeccable quality and full 2-year warranty! Enclosure is laser-engraved with logo and labels, to ensure permanency. Note: ham it up plus barebones circuit board is sold separately and is NOT included! Designed and manufactured by NooElec in North America. A high-quality black aluminum enclosure custom-made for our Ham It Up Plus Barebones http://www. Amazon. Com/dp/b076cyH6NL.
BrandNooElec #ad
ManufacturerNooElec Inc. #ad
Height0.79 Inches
Length3.94 Inches
Width2.36 Inches
Part Number100768
Model8541612353

8. NooElec

#ad

Balun One Nine v1, Tiny Low-Cost 1:9 HF Antenna Balun and Unun with Antenna Input Protection for Ham It Up, HackRF and Other HF-Capable Radios. Great for DIY Dipole and Longwire Antennas, RTL-SDR

#ad
NooElec #ad - Only 39. 2mm x 13. 0mm and 5g! Excellent specifications. Fully assembled, and easy to use. Great match for attaching a long wire to the Ham It Up. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.39 Inches
Length1.57 Inches
Weight0.01 Pounds
Width0.39 Inches
Part Number100652
ModelBalun One Nine

9. NooElec

#ad

For Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios, Extruded Aluminum Enclosure Kit, Blue

#ad
NooElec #ad - High-quality custom aluminum enclosure for Ham It Up v1. 3. Includes all required hardware to mount your PCB! Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Metal case helps to protect PCB from stray EMI, improving sensitivity.
BrandNooElec #ad
ManufacturerNooElec Inc. #ad
Part Number100593
Model100672

10. Semoic

#ad

Semoic 150K-30MHZ HF Upconverter for RTL2383U SDR Receiver with Aluminum Case

#ad
Semoic #ad - Mixing chip: NE602. Working voltage: 5V;. Lo: 125mhz, need to set in the software or frequency + 125m, such as 7. 05m, this is very important, is 123. 05m 7. 05 +125;. Power: 1. 6w. Receiving frequency: 150K-30MHZ;.
BrandSemoic #ad
ManufacturerSemoic #ad
Part Number184467
Model184467