As an Amazon Associate I earn from qualifying purchases.
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.


Expand your ventilation: even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. Synchronous fan control: your set pwm signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system.




In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans.
The ten fans will spin at the same speed, that designated by the system for that fan. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. You can connect to the CPU fan lead on the system board or the chassis fan lead. Please note 4pin fan speed can be adjusted by temperature control.

Easy installation double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place. 1 to 8 fan hubthe fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips.

Air volume: 82cfm max, wind pressure: 2. 1mm h2o max speed: 1850rpm±10%, higher air flow to enhance cooling performance.

1. ThreeBulls
#ad
PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch, ThreeBulls PWM Fan Hub
#adThreeBulls #ad - Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
More information #ad
Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.Brand | ThreeBulls #ad |
Manufacturer | ThreeBulls #ad |
Part Number | 8541606340 |
Model | 8541606340 |
More information #ad
2. DEEP COOL
#ad
Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, Occupying only One 4-pin Motherboard Header, DEEPCOOL FH-10 Integrated Fan Hub
#adDEEP COOL #ad - They will run at FULL SPEED. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. Powered by a stable sata connection to the system PSU for up to 10 fans.More information #ad
Velcro and screw mountings applicable for the tower interiors. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Only speed of Fan 1 can be identified by the system. That is, all pwm fans will run at the same DUTY RATIO.Brand | DEEP COOL #ad |
Manufacturer | DEEPCOOL #ad |
Height | 1.18 Inches |
Length | 8.39 Inches |
Width | 4.41 Inches |
Part Number | FH-10 |
Model | DEEP COOL |
More information #ad
3. ARCTIC
#ad
10-fold PWM Fan Distributor with SATA Power, Black, ARCTIC Case Fan Hub
#adARCTIC #ad - External power supply: the fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. Cable management: case fan hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing.More information #ad
Technical details: output: 10 x 4-pin pwm socket, input current: up to 4. 5 a, dimensions: 55. 6 x 86. 3 x 14. 3 mm, output current: up to 1 a per port, input: SATA Power + 4-pin Fan Header, Weight: 50 g. Expand your ventilation: even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. Synchronous fan control: your set pwm signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system.
Brand | ARCTIC #ad |
Manufacturer | ARCTIC #ad |
Height | 3.4 Inches |
Length | 0.56 Inches |
Weight | 0.11 Pounds |
Width | 2.19 Inches |
Part Number | ACFAN00175A |
Model | ACFAN00175A |
Warranty | 2 years |
More information #ad
4. DEEP COOL
#ad
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04
#adDEEP COOL #ad - Compatible with 3-pin/4-pin fans. 4-port fan hub. Support PWM function. Support Cable management. Double-sided adhesive Installation.More information #ad
Brand | DEEP COOL #ad |
Manufacturer | Deepcool #ad |
Height | 3.4 Inches |
Length | 2.5 Inches |
Weight | 0.1 Pounds |
Width | 1 Inches |
Part Number | FH-04 |
Model | FH-04 |
Warranty | 1 Year |
More information #ad
5. Thermaltake
#ad
Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1
#adThermaltake #ad - Blue led power Indicator. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place.More information #ad
Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis.Brand | Thermaltake #ad |
Manufacturer | Thermaltake USA Direct #ad |
Height | 0.7 Inches |
Length | 3.2 Inches |
Weight | 0.1 Pounds |
Width | 1.7 Inches |
Part Number | AC-023-AN1NAN-A1 |
Model | AC-023-AN1NAN-A1 |
Warranty | 1 year warranty |
More information #ad
6. RFAdapter
#ad
Internal Motherboard Fan Power Extension Cable Cord RFAdapter for Computer Cooler Case 4-Pin and 3-Pin Fans, 17.7inch, 2 Pack PC Fan Splitter 5 Way Sleeved Power Supply Cable Adapter, PWM Fan Hub
#adRFAdapter #ad - The 1 to 5 pwm fan splitter can supply power to 5 fans. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. Come with double-sided tape, easy to install. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.More information #ad
Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean. Compatible with all 4 pin and 3 pin case fans. Package included: 2 pack 1 to 5 splitter 5 way fan power supply cable.Brand | RFAdapter #ad |
Manufacturer | RFAdapter #ad |
Part Number | RFA0651 |
More information #ad
7. ELECTOP
#ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
#adELECTOP #ad - Red is expected to be a pass through for the cpu fan. So, then the speed is regulated by the speed for the "source" fan. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%.In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans.
More information #ad
For both 4-pin and 3-pin fans. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Since the mainboard can only receive one rotation speed signal, but no speed signal. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. The ten fans will spin at the same speed, that designated by the system for that fan. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. You can connect to the CPU fan lead on the system board or the chassis fan lead. Please note 4pin fan speed can be adjusted by temperature control.
Brand | ELECTOP #ad |
Manufacturer | Electop #ad |
Part Number | CPUCOOL-1-10-4P |
Model | 4328444952 |
More information #ad
8. ID-COOLING
#ad
PWM Functional Fan Adapter, 8 PWM Ports+8 ARGB Ports, ID-COOLING HA-02 Fan Hub for Computer Internal Fans, ARGB Motherboard Sync
#adID-COOLING #ad - Pwm functional fan adapterfan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. Widely compatible the 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans.Easy installation double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place. 1 to 8 fan hubthe fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips.
More information #ad
The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM. The fan hub offers greater flexibility between motherboard and CPU cooling fans. Clean & tidyblack sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy.Brand | ID-COOLING #ad |
Manufacturer | ID-COOLING #ad |
Part Number | HA-02 |
Model | HA-02 |
More information #ad
9. Thermalright
#ad
SATA Power Cord Direct Input, Thermalright Integrated Fan Hub, 5V Fan Hub, Support up to 10 Fans, 10-Port 4 Pin PC Fan Controller
#adThermalright #ad - Designed for projects that requires cooling or ventilation; or as a replacement fan for various products. The case fan square frame with excellent airflow and pressure performance: ideal for use on air cooling radiators.Air volume: 82cfm max, wind pressure: 2. 1mm h2o max speed: 1850rpm±10%, higher air flow to enhance cooling performance.
More information #ad
Size: 120*120*25mm, interface: 4pin pwm, current: 025a, voltage: 12v, noise ≤ 29. 6dba, dynamic equilibrium Designed for projects that requires. 4-pin pwm version with excellent balance of performance and quietness, supports automatic motherboard speed control.Brand | Thermalright #ad |
Manufacturer | Thermalright #ad |
Height | 0.67 Inches |
Length | 3.54 Inches |
Width | 1.57 Inches |
Part Number | TL-FAN-HUB-Controller |
More information #ad
10. TeamProfitcom
#ad
PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adapter Cable for 12V Desktop Computer Cooler Case Fans 4-Pin & 3-Pin 14 inches 2 Pack TeamProfitcom
#adTeamProfitcom #ad - Power up to 5 pc fans from a Single 4-Pin PWM Fan Header. Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;.More information #ad
Compatible with all 12v cpu and case fans with 4 pin or 3 pin connector; PLEASE NOTE: Do not exceed 12V, 2A total output. Please check your devices specification when to use the PWM fan hub.Brand | TeamProfitcom #ad |
Manufacturer | TeamProfitcom #ad |
Height | 0.7 Inches |
Length | 15 Inches |
Width | 1 Inches |
Part Number | TeamProfitcom - 00012021 |
Model | BX0019-1415X |
More information #ad