As an Amazon Associate I earn from qualifying purchases.
1. SMALLRIG #ad
SmallRig Cold Shoe Mount Adapter 2pcs Pack with 1/4"-20 Thread for Camera Cage Flash LED Moniter, 2060 #adSMALLRIG #ad
- Note: this cold shoe mount is not suitable for dji gimbal and not for zhiyun as well. The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe.
Such as cage for sony a6500 a6300 a6500, cold shoe block, such as cage, etc. For using on a cage, you only need to lock it on the cage via the included 1/4"-20 screw, except for SmallRig Full Cage1661, the M2.5
5 threaded is unnecessary. The arrowheads on the cold shoe show the direction to mount additional accessories. There comes with two secure bending bevels on the one end to prevent accidental removal. Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, cage for panasonic gh5 gh4 gh3, handle and plate etc.
2. SMALLRIG #ad
SmallRig 1/4" Mini Ball Head Cold Shoe Mount Adapter with 1/4"-20 Thread for Camera Phone Cage LED Video Light-3577 #adSMALLRIG #ad
- Flexible positioning: the aluminium mount enables you to tilt up to 138° to position your light and realize precise lighting. Note: mini mount support device up to 250g. Portable and lightweight: mini mount 3577 is designed to hold your light onto the top of the camera, Weighing only 20g.
Anti-scratch: made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable.
Such as id: 3290, 3157, 3561, 3611 and so on. Features an anti-scratch pad on the top to protect the device from scratch. Toolless installation: come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage.
Wide compatibility: with a 1/4" screw on the top for light or microphone. If you don't want to put too much weight on the camera, Cage or other mounting systems via a cold shoe adapter. With cold shoe adapter on the base for more accessories attachment if needed. Portable and Lightweight mini shoe holder, this is a good choice.
3. Anwenk #ad
Camera Hot Shoe Mount to 1/4"-20 Tripod Screw Adapter Flash Shoe Mount for DSLR Camera Rig Pack of 2 #adAnwenk #ad
- Flash hot shoe mount with 1/4"-20 tripod screw adapter. To mount your microphone, camcorder or digital camera, led light, monitor to DSLR, or adapt anything else that has a 1/4-20 receptacle.
Material : aluminum alloy. Easily attach dslr accessories to camera hot shoe mount or cold shoe mount. Looking for 1/4"-20 camera screw adapters as well? Search"B018SMYL9M" to find camera screw adapters. Easy to use.
4. Anwenk #ad
Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid Update #adAnwenk #ad
- Comes with 1/4"-1/4" male to male screw for your varied configuration. Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.
Note: may not Work for Sony Flash. Package includes 1x flash hot shoe mount adapter updated;1x 1/4"-1/4" screw.
Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes. 100% money Back. Note: camera, flash, umbrella holder and tripod are not included. 1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head.
|Part Number||Shoe Mount Adapter|
|Model||Shoe Mount Adapter|
5. SMALLRIG #ad
2059, SMALLRIG 1/4" Camera Hot Shoe Mount with Additional 1/4" Screw 2pcs Pack #adSMALLRIG #ad
- Compatibility the cold shoe adapter works for most cameras including Canon, Pentax, Kodak, Olympus, Fujifilm, Panasonic, Nikon, etc.
If you need one pcs pack, please see the SMALLRIG 761. Note the ball head maximum load: 3 kg. Package included the mini ball head mount 2059 is two pcs pack. Mini ball head smallrig mini ball head mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut.
Adjustable direction the ball head can be adjusted into most any position.
6. SLOW DOLPHIN #ad
SLOW DOLPHIN 1/4 Inch Hot Shoe Mount Adapter Tripod Screw for DSLR Camera Rig2 Packs #adSLOW DOLPHIN #ad
- Material : Anodized aluminum metal. Durable and Easy to use. Easy to install microphone, monitor to dslr, LED light, camcorder or digital camera, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle.
Fits on the hot shoe of most cameras and can connect 2 cameras together. Includes 2 nuts which can be adjusted.
7. ULANZI #ad
Ulanzi PT-3 Triple Cold Shoe Gimbal Microphone Mount Extenstion Bar, w 1/4 inch Adapter Video Light Microphone Mount Compatible for DJI OM 4/OSMO Mobile3/Zhiyun Smooth q 4/Feiyu Gimbal Stabilizer #adULANZI #ad
- Perfect for smartphone gimbals vlogging or videography - with 3 cold shoe mounts extension, and 1/4'' screw, you can mount led video light and microphone on your gimbals like DJI OM 4 OSMO Mobile 4 Zhiyun Smooth 4 Q X Hohem iSteady 3 Mobile Plus X Feiyu Vimble etc.
With 1/4-20 on each: each of the screws has a 1/4-20 socket on the bottom, so another device such as a tripod can be attached.
Three cold shoe mounts enables many accessories combinations, such as LED light, microphone, doing what traditional single hot shoe can't do!. If you're pressed for time in setting up tripod for accessories, or you don't want to be so fully-loaded for simple shootings, this bracket can make the optimal backup for holding your accessories.
Great portability, easy to bring with you in any situation. To hold your accessories, the bracket is solidly built with a security lock to avoid easy falling-off, minimizing potential damage.
8. Anwenk #ad
2Pack, Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4"-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash #adAnwenk #ad
- Material: metal construction with black anodized for higher durability. Never have to worry about the springs falling out again. Universal 1/4" tripod screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand.
Smart design - with a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place.
That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel. Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount. Work on monitor, magic arm, nikon Canon speedlite flash, ring light, trigger, mic and any accessories that has a camera type of shoe. Updated cold shoe flash stand adapter. Updated: no spring.
|Part Number||flash cold shoe -update|
9. Anwenk #ad
Camera Metal Cold Shoe Flash Stand Adapter with 1/4"-20 Tripod Screw Thread 2 Packs #adAnwenk #ad
- Material: metal construction with black anodized for higher durability. Size:1. 25"x07"x07". Tightening knobs opens at a max of 22mm to the point of the angle, fits into any dslr rigs with a shoe plate.
Package includes 2 pcs of solid metal cold shoe flash stands. Work on monitor, compatible with canon/Nikon speedlite flash, ring light, magic arm, trigger, mic and any accessories that has a camera type of shoe. Universal 1/4" tripod screw -metal cold shoe to mount your flash onto bracket.
|Part Number||Cold Shoe|
10. zoopper #ad
Zoopper 2 Pack Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Monitor #adzoopper #ad
- Secure and solid designthere is a stop screw on the cold shoe to prevent shoe mount accessories from accidentally sliding forward and keep your accessories slide perfectly in right place.
High qualitysturdy aluminum alloy material with precision CNC machining and black anodized treatment for higher durability. High compatibility standard cold shoe mount compatible. Attaches to any 1/4"-20 threaded hole.
Ideal for mounting monitor, microphone shock mounts, on-camera lights, hot shoe accessories, flashes, etc. What you get 2 x cold shoe, 2 x 1/4"-20 screw, 1 x Hex Spanner, our worry-free 12-month warranty, Welcome guide, and friendly customer service. Unique appearanceUnique appearance design, thread groove design is unique, Add visual beauty.