Top 10 Cold Shoe Mount Adapter with 1/4 – Camera Flash Shoe Mounts

As an Amazon Associate I earn from qualifying purchases.

1. SMALLRIG

#ad

SmallRig Cold Shoe Mount Adapter 2pcs Pack with 1/4"-20 Thread for Camera Cage Flash LED Moniter, 2060

#ad
SMALLRIG #ad - The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe. The arrowheads on the cold shoe show the direction to mount additional accessories.

Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc. Note: this cold shoe mount is not suitable for dji gimbal and not for zhiyun as well. Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, such as cage, cold shoe block, handle and plate etc. For using on a cage, you only need to lock it on the cage via the included 1/4"-20 screw, except for SmallRig Full Cage1661, the M2.5 threaded is unnecessary. There comes with two secure bending bevels on the one end to prevent accidental removal.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.35 Inches
Length0.98 Inches
Weight0.04 Pounds
Width0.98 Inches
Part Number2060-SR
Model4332041552

2. SMALLRIG

#ad

SmallRig 1/4" Mini Ball Head Cold Shoe Mount Adapter with 1/4"-20 Thread for Camera Phone Cage LED Video Light-3577

#ad
SMALLRIG #ad - Portable and lightweight mini shoe holder, Weighing only 20g. Features an anti-scratch pad on the top to protect the device from scratch. Flexible positioning: the aluminium mount enables you to tilt up to 138° to position your light and realize precise lighting.

Note: mini mount support device up to 250g. If you don't want to put too much weight on the camera, this is a good choice. With cold shoe adapter on the base for more accessories attachment if needed. Such as id: 3290, 3157, 3561, 3611 and so on. Anti-scratch: made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable.

Toolless installation: come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage. Portable and lightweight: mini mount 3577 is designed to hold your light onto the top of the camera, Cage or other mounting systems via a cold shoe adapter. Wide compatibility: with a 1/4" screw on the top for light or microphone.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1 Inches
Length1.28 Inches
Weight0.04 Pounds
Width0.94 Inches
Part Number3577
Model3577

3. Anwenk

#ad

Camera Hot Shoe Mount to 1/4"-20 Tripod Screw Adapter Flash Shoe Mount for DSLR Camera Rig Pack of 2

#ad
Anwenk #ad - Easy to use. Looking for 1/4"-20 camera screw adapters as well? Search"B018SMYL9M" to find camera screw adapters. Flash hot shoe mount with 1/4"-20 tripod screw adapter. Material : aluminum alloy. Easily attach dslr accessories to camera hot shoe mount or cold shoe mount. To mount your microphone, led light, monitor to dslR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Height0.3 Inches
Length5.2 Inches
Weight0.09 Pounds
Width4.6 Inches
Part Number1/4hoeshoe-2
ModelSL-1/4hotshoe-2
WarrantyNo

4. Anwenk

#ad

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid Update

#ad
Anwenk #ad - 100% money Back. Note: camera, flash, umbrella holder and tripod are not included. Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.

Note: may not Work for Sony Flash. Comes with 1/4"-1/4" male to male screw for your varied configuration. Package includes 1x flash hot shoe mount adapter updated;1x 1/4"-1/4" screw. 1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head. Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part NumberShoe Mount Adapter
ModelShoe Mount Adapter

5. SMALLRIG

#ad

SMALLRIG 1/4" Camera Hot Shoe Mount with Additional 1/4" Screw 2pcs Pack, 2059

#ad
SMALLRIG #ad - Adjustable direction the ball head can be adjusted into most any position. If you need one pcs pack, please see the SMALLRIG 761.

Mini ball head smallrig mini ball head mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut. Note the ball head maximum load: 3 kg. Compatibility the cold shoe adapter works for most cameras including Canon, Nikon, Panasonic, Olympus, Fujifilm, Kodak, Pentax, etc. Package included the mini ball head mount 2059 is two pcs pack.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.38 Inches
Length2.36 Inches
Width0.98 Inches
Part Number2059-SR
Model4332041521

6. SLOW DOLPHIN

#ad

SLOW DOLPHIN 1/4 Inch Hot Shoe Mount Adapter Tripod Screw for DSLR Camera Rig2 Packs

#ad
SLOW DOLPHIN #ad - Fits on the hot shoe of most cameras and can connect 2 cameras together. Durable and Easy to use. Includes 2 nuts which can be adjusted. Material : Anodized aluminum metal. Easy to install microphone, camcorder or digital camera, monitor to DSLR, led light, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle.
BrandSLOW DOLPHIN #ad
ManufacturerSLOW DOLPHIN #ad
Weight0.07 Pounds
Part NumberSD-120
Model951096

7. ULANZI

#ad

W 1/4 inch Adapter Video Light Microphone Mount Compatible for DJI OM 4/OSMO Mobile3/Zhiyun Smooth q 4/Feiyu Gimbal Stabilizer, Ulanzi PT-3 Triple Cold Shoe Gimbal Microphone Mount Extenstion Bar

#ad
ULANZI #ad - Great portability, easy to bring with you in any situation. If you're pressed for time in setting up tripod for accessories, or you don't want to be so fully-loaded for simple shootings, this bracket can make the optimal backup for holding your accessories.

To hold your accessories, the bracket is solidly built with a security lock to avoid easy falling-off, minimizing potential damage. With 1/4-20 on each: each of the screws has a 1/4-20 socket on the bottom, so another device such as a tripod can be attached. Three cold shoe mounts enables many accessories combinations, microphone, such as LED light, doing what traditional single hot shoe can't do!.

Perfect for smartphone gimbals vlogging or videography - with 3 cold shoe mounts extension, and 1/4'' screw, you can mount led video light and microphone on your gimbals like DJI OM 4 OSMO Mobile 4 Zhiyun Smooth 4 Q X Hohem iSteady 3 Mobile Plus X Feiyu Vimble etc.
BrandULANZI #ad
ManufacturerUlanzi #ad
Part NumberST-PT3
ModelSG_B07CWS619X_US

8. Anwenk

#ad

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4"-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

#ad
Anwenk #ad - Smart design - with a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place.

Never have to worry about the springs falling out again. Updated: no spring. Updated cold shoe flash stand adapter. Work on monitor, nikon canon speedlite flash, trigger, magic arm, ring light, mic and any accessories that has a camera type of shoe. Material: metal construction with black anodized for higher durability. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel. Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount. Universal 1/4" tripod screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part Numberflash cold shoe -update

9. Anwenk

#ad

Camera Metal Cold Shoe Flash Stand Adapter with 1/4"-20 Tripod Screw Thread 2 Packs

#ad
Anwenk #ad - Tightening knobs opens at a max of 22mm to the point of the angle, fits into any dslr rigs with a shoe plate. Package includes 2 pcs of solid metal cold shoe flash stands. Material: metal construction with black anodized for higher durability. Size:1. 25"x07"x07". Work on monitor, ring light, compatible with Canon/Nikon speedlite flash, magic arm, trigger, mic and any accessories that has a camera type of shoe. Universal 1/4" tripod screw -metal cold shoe to mount your flash onto bracket.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Height0.67 Inches
Length1.5 Inches
Weight0.1 Pounds
Width0.79 Inches
Part NumberCold Shoe
ModelCold Shoe

10. zoopper

#ad

Zoopper 2 Pack Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Monitor

#ad
zoopper #ad - High compatibility standard cold shoe mount compatible. Secure and solid designthere is a stop screw on the cold shoe to prevent shoe mount accessories from accidentally sliding forward and keep your accessories slide perfectly in right place.

Unique appearanceUnique appearance design, thread groove design is unique, Add visual beauty. Attaches to any 1/4"-20 threaded hole. Ideal for mounting monitor, microphone shock mounts, hot shoe accessories, on-camera lights, flashes, etc. High qualitysturdy aluminum alloy material with precision CNC machining and black anodized treatment for higher durability. What you get 2 x cold shoe, welcome guide, 1 x hex Spanner, our worry-free 12-month warranty, 2 x 1/4"-20 screw, and friendly customer service.
Brandzoopper #ad
Manufacturerzoopper #ad
Height0.55 Inches
Length0.94 Inches
Width1.14 Inches
Part NumberLX-001