As an Amazon Associate I earn from qualifying purchases.

High performance: stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.

Make sure the welding is correct 18650 battery with nickel spot welding, the batteries must be matched well. 35a discharge current. The better the battery consistency is, other batteries with solder welding.
Stable protective functions. 10s li-ion batteries. The bms 10s protection board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries. Fully charged. Charging connector and discharging connector are separated, discharging current is 35A.

Temperature protection-low temperature -20℃ battery protection and high temperature 70℃ discharging battery protection. Over-charge over-discharge protection-18650 Li-ion battery pack will stop charge when a single cell voltage reaches 4.



Function: it has balance function which would ensure each battery cell being fully charged at same time. Applicable: it is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.


20v. Tracking information available. Short circuit protection -the bms will stop the battery supply when there is a device short circuit. Separate port common bms- Charge and Discharge in Different Port and Wire.

1. ANMBEST
#ad
ANMBEST 10S 36V 35A PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module with Balance for Battery Cell Pack
#adANMBEST #ad - High-accuracy voltage detection circuit, fine workmanship and durable. It has balance function which would ensure each battery cell being fully charged at same time. The protection board is for 10 series cell Li-ion batteries, it can be used for 3.More information #ad
7v ternary batteries, manganese acid batteries and cobalt acid batteries. With over-discharge protection, temperature control protection function, overcurrent protection, overcharge protection, safe and reliable. It is suitable for electric car, skateboard car, inverter, electric power assistant car, etc.Brand | ANMBEST #ad |
Manufacturer | ANMBEST #ad |
Part Number | ANMBEST_MD375 |
More information #ad
2. Hilitand
#ad
Battery Protection Board,10S 36V 30A Cell Battery Protection BMS PCB Board with Balance Function
#adHilitand #ad - Balance function: it has balance function which would ensure each battery cell being fully charged at same time. Size: 64x35x9mm. Application range: the protection board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.High performance: stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.
More information #ad
Charging discharging separated: Charging connector and discharging connector are separated, continuous discharging current is 30A. Vital data:charging 4. 25a, discharging 2. 6a, over-current 30a, suitable for electric bicycles with 1000W motor.Brand | Hilitand #ad |
Manufacturer | Hilitand #ad |
Height | 2.36 Inches |
Length | 7.09 Inches |
Weight | 0.1 Pounds |
Width | 6.69 Inches |
Part Number | Hilitandpt4i9obg2x |
More information #ad
3. Hilitand
#ad
36V 35A 10S Battery BMS Protection Board PCB for Ternary Cobalt Cells with Balancing
#adHilitand #ad - Help prolong the service time of your battery pack. Prolong the serviec time. Before installing the protection board, the farther the running distance is, the best performance of the protection board is; the battery should be connected in parallel and then in series.Make sure the welding is correct 18650 battery with nickel spot welding, the batteries must be matched well. 35a discharge current. The better the battery consistency is, other batteries with solder welding.
More information #ad
Multiple protective functions including overcharge protection, overdischarge protection and short circuit protection. 10s bms has balance function which would ensure each battery cell being fully charged at same time. Stable protective functions. 10s li-ion batteries. The bms 10s protection board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries. Fully charged. Charging connector and discharging connector are separated, discharging current is 35A.
Brand | Hilitand #ad |
Manufacturer | Hilitand #ad |
Height | 0.79 Inches |
Length | 5.91 Inches |
Weight | 0.11 Pounds |
Width | 3.94 Inches |
Part Number | Hilitandwuq2zc7grt |
More information #ad
4. DALY
#ad
DALY BMS 10S 36V 100A Li-ion Battery Protection Board with Balance Leads Wires Common Port DIY BMS for 18650 Battery Pack
#adDALY #ad - What you will get: rated 3. 7v li-ion bms without smart communication funCTION+Matching Balance Wire+Temperature Sensor+ Instruction Manual. Tracking information available.Temperature protection-low temperature -20℃ battery protection and high temperature 70℃ discharging battery protection. Over-charge over-discharge protection-18650 Li-ion battery pack will stop charge when a single cell voltage reaches 4.
More information #ad
25v and stop discharge when its voltage reaches 2. 7v. Quality guarantee- iso/ fcc/ rohs/ pse/ ce approved. Shipping time within 9-14 days from China Dalyelec Manufacturing base normally. Delivery will be postponed as per National Holidays Regulation. Short circuit protection: when there is Defection or Damage to the Circuit, the BMS Will Shut Off The Whole Circuit.Brand | DALY #ad |
Manufacturer | Dongguan Daly Electronics Co., Ltd #ad |
Height | 0.94 Inches |
Length | 6.54 Inches |
Width | 2.56 Inches |
Part Number | li-ion 10s |
More information #ad
5. KOOBOOK
#ad
KOOBOOK 1Pcs 10S 30A 36V Li-ion Cell 18650 Battery Protection BMS PCB Board with Balance Function for Motorcycle Scooter Protection Board
#adKOOBOOK #ad - With temperature control protection function. Suitable for electric car, electric power assistant car, inverter, skateboard car, etc. Li-ion cell 18650 battery protection board. Suitable for 10 series cell Li-ion batteries, can be used for 3.More information #ad
7v ternary batteries, manganese acid batteries and cobalt acid batteries. Overcharge protection, over-discharge protection and short circuit protection. Has balance function which would ensure each battery cell being fully charged at same time.Brand | KOOBOOK #ad |
Manufacturer | KOOBOOK #ad |
Part Number | KB467 |
Warranty | NO |
More information #ad
6. Acogedor
#ad
BMS Protection Board, Skateboard Car, for Electric Car, Lithium Battery Power Charger Board Module with Cable, etc, 36V 30A 10 Series Li-ion Lithium Battery Protection Board, Inverter
#adAcogedor #ad - Good heat dissipation effect and energy savingthe aluminum plate is used, which is not only professional but also practical. 10a;balance voltage: 4. 2v;high temperature discharge: 75 ℃;Low temperature charge: - 7 ℃. Working current: 30a;continuous maximum current: 20A;Overdischarge protection voltage: 2.More information #ad
6v;overcharge protection voltage: 4. 25v;charging current: max. Scope of applictionit is suitable for electric car, inverter, skateboard car, electric power assistant car, etc. Specificationsapplicable voltage: 36v;applicable power:Brand | Acogedor #ad |
Manufacturer | Acogedor #ad |
Height | 2.36 Inches |
Length | 7.09 Inches |
Weight | 0.09 Pounds |
Width | 6.69 Inches |
Part Number | Acogedorymn6hq78vc |
More information #ad
7. Jectse
#ad
36V 30A PCB Lithium Battery Protection Board,10S Charger PCB BMS Protection Board,Integrated Circuits Protection Board,with Balance Function,Temperature Control Protection
#adJectse #ad - Jectse: at jectse, please feel free contact us, if you have any question or need some suggestion about the products we sold, we have a professional team who can always give you best service and solve your problems.Function: it has balance function which would ensure each battery cell being fully charged at same time. Applicable: it is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
More information #ad
With temperature control protection function, safe and reliable. Multiple protection: Support overcharge protection, over-discharge protection and short circuit protection. Product: the protection board is for 10 series cell Li-ion batteries, it can be used for 3. 7v ternary batteries, manganese acid batteries and cobalt acid batteries. Thanks for you business.Brand | Jectse #ad |
Manufacturer | Jectse #ad |
Height | 2.36 Inches |
Length | 7.09 Inches |
Width | 6.69 Inches |
Part Number | Jectsers3txn1vgk |
More information #ad
8. Walfront
#ad
36V 35A 10Series BMS PCB Protection Board with Balancing for Li-ion Battery Cell Pack 69×51.5×10mm/2.71×2.02×0.39"
#adWalfront #ad - Designed for 10 cell li-ion batteries, can also be used for ternary batteries, manganese acid batteries and cobalt acid batteries. Balance function ensures each battery cell being fully charged at the same time.More information #ad
Help prolong the service life of your battery pack. Multiple protective functions including overcharge protection, overdischarge protection and short circuit protection. 35a discharging current, separated charging connector and discharging connector, easy to use.Brand | Walfront #ad |
Manufacturer | Walfront #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.11 Pounds |
Width | 0 Inches |
Part Number | Walfrontu1y8fwvpsg |
More information #ad
9. DALY
#ad
DALY Li-ion BMS 10S 36V 30A PCB Protection Board with Seperate Charge and Discharge Protection Port for DIY Electric Tools 18650 Batteries
#adDALY #ad - Over-charge over-discharge protection-lithium battery pack will stop charge when a single cell voltage reaches 4. 25v and stop discharge when its voltage reaches 2.20v. Tracking information available. Short circuit protection -the bms will stop the battery supply when there is a device short circuit. Separate port common bms- Charge and Discharge in Different Port and Wire.
More information #ad
Delivery will be postponed as per National Holidays Regulation. What you will get a separate Port BMS+Balance Wire +Temperature Sensor. Quality guarantee-iso/ fcc/ rohs/ pse/ ce approved. Shipping time within 9-27 days from China Dalyelec Manufacturing base normally. After disconnecting the load, the short-circuit protection is released.Brand | DALY #ad |
Manufacturer | Dongguan Daly Electronics Co., Ltd #ad |
Height | 0.63 Inches |
Length | 3.15 Inches |
Width | 2.4 Inches |
More information #ad
10. YWBL-WH
#ad
18650 Lithium Battery Protection Board 10S 36V 30A BMS PCB Board Balance Function 1000W
#adYWBL-WH #ad - The protection board is of function which would ensure each battery cell being fully charged at same time. The protection board is for 10 series cell Li-ion batteries, it can be used for 3. 7v ternary batteries, manganese acid batteries and cobalt acid batteries.More information #ad
The protection board supports overcharge protection, over-discharge protection and short circuit protection. The protection board is suitable for electric car, skateboard car, inverter, electric power assistant car, etc. The protection board is of temperature control protection function, safe andd reliable to use.Brand | YWBL-WH #ad |
Manufacturer | YWBL-WH #ad |
Height | 2.36 Inches |
Length | 7.09 Inches |
Weight | 0.09 Pounds |
Width | 6.69 Inches |
Part Number | YWBL-WHoik6754ch1 |
More information #ad