Top 10 BAFX IR Receiver Cable – Remote-Control Extenders

As an Amazon Associate I earn from qualifying purchases.

1. Bafx Products

#ad

BAFX Products, Extra IR Receiver for BAFX Products IR Infrared Repeater Kit/Remote Control Extender Kits

#ad
Bafx Products #ad - Compatability – compatible with the bafx products single zone ir repeater / remote control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits! Important – this ir receiver is not designed to be plugged directly into a devices IR port.

Works with any make model of remote controls as long as they use Infrared technology. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support! Functionality – our ir sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Doing so will not work and may cause undesirable operation of your device.

Expand – increase & expand the reach of your current single zone bafx products IR Remote Control Extender kit! Add more receivers to more rooms to control your cable box, media player and more from more locations in your home, receiver, office or business. Can be used with any IR remote controls. Warranty – 1 year warranty against manufacturing defects provided by BAFX Products. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”.
BrandBafx Products #ad
ManufacturerBAFX Products #ad
Height0.2 Inches
Length3.5 Inches
Weight0.02 Pounds
Width2 Inches
Part NumberBAFX3257
ModelBAFX3257

2. Bafx Products

#ad

BAFX Products Infrared IR Remote Control Extender or IR Repeater Kit, Control 1 to 8 Devices Expandable to 12!

#ad
Bafx Products #ad - Not to mention our friendly and knowledgeable usa based support who are ready to help answer your questions and assist in getting you setup! Compact – a smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look.

Extra receivers and transmitters may be purchased separately. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling! Control – with the provided components you can control up to 8 infrared devices Expandable to 12 devices from one location with the included IR Receiver Expandable to 3 receivers. Now also compatible with marantz devices! Compatible with all brands of components such as: Uverse, Scientific Atlanta, Sony, LG, Apple & more!. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it.

Improved! now compatible with all ir controlled devices with better performance, Verizon, yamaha, Logitech, cisco, ATT, no lag & better ease of use. Put the cable box, dvd player & roku in a closet hidden from view, close the door and STILL be able to use the remote control. Warranty & support – bafx products offers a 1 year warranty against manufacturing defects with a simple & super easy claims process. Build – create the a/v setup of your dreams with the help of our infrared repeater kit.
BrandBafx Products #ad
ManufacturerBAFX Products #ad
Height5 inches
Length5 inches
Weight0.82 Pounds
Width3 inches
Part NumberBAFX3233
ModelBAFX3233
WarrantyBAFX Products is pleased to offer a no-risk, 60-day 100% money back guarantee. If for any reason you are not completely satisfied with your purchase, you may return it within the first 60 days for a full refund (we will even pay return shipping)! BAFX Products will gladly accept defective products within one year of the original invoice date. We pay the return postage and will ship a replacement product to you right away.

3. Bafx Products

#ad

25 Foot/Feet Stereo Headphone Extension Cable, Shielded, 3.5MM M/F Jacks, BAFX Products

#ad
Bafx Products #ad - Quality - each cable is pre-tested before being sold and is made of high quality parts to ensure long lasting life. Multiple cables can be connected together to make longer lengths when needed. Some cables being sold are made to an inferior qualityt causing them to not transmit IR signals properly.

Compatibility - we guarantee our headphone extension cables to be compatible with the bafx Products IR Repeater Kits. Simple as that. Warranty - we are so confident in our cables we warranty them for 10 yeaRS! Should you ever have a problem with your cable though it is highly unlikey we will gladly replace it free of charge at ZERO cost to you! With US based support, the process is very simple! Each cable also has shielding to protect it from interference of other cables and devices.

Perfect length for many A/V setups. 25' length - cable measures 25ft in length from end to end. This cable can be used to enstend either the ir receiver or emitters of your BAFX Products Repeater Kits! Versatility - while designed for use with the bafx products IR repeater kit, these cable can also be used for extensiong speakers, headphones or anything requiring a stereo 3. 5mm jack.
BrandBafx Products #ad
ManufacturerBAFX Products #ad
Height0.12 Inches
Length300 Inches
Weight0.25 Pounds
Width0.12 Inches
Part NumberBAFX3417
ModelBAFX3417

4. Sewell Direct

#ad

Sewell Direct SW-29727-10 12-Feet IR Infrared Extension Cable

#ad
Sewell Direct #ad - Jacket material: PVC. Conductor: Bare Copper. Length: 12 ft. Connector type: 3. 5mm stereo Male / 3. 5mm stereo Female. Connectors: Gold-plated.
BrandSewell Direct #ad
ManufacturerSewell Development Corp. dba Sewell Direct #ad
Height6 Inches
Length6 Inches
Weight0.2 Pounds
Width0.5 Inches
Part NumberSW-29727-10
ModelSW-29727-10

5. Cable Matters

#ad

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable, 10 Feet

#ad
Cable Matters #ad - Simple installation of this lightweight ir cable; locate the ir blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting.

Universal compatibility of ir extender cable with most a/v equipment with infrared sensors not RF; 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote. Usb powered ir extension cable has an integrated 6 foot y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger. Ir remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission.

Home theater accessory repeats the ir signal to a dvd player, stb box, receiver or other a/v source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
BrandCable Matters #ad
ManufacturerCable Matters #ad
Height0.5 Inches
Length9.4 Inches
Width6.4 Inches
Part Number203002-10
Model203002-10

6. Infrared Resources

#ad

Infrared Resources 9ft 38-56kHz Dual Band External Universal IR Receiver Extender for Verizon FiOS + Most Cable Boxes, Hotel and DTA Units.

#ad
Infrared Resources #ad - Compatible with verizon fios cable boxes model qip, 4200/hdc, ipc, 4240, chs, uverse or a/v receivers, 8300/hd, ir repeater kits, dta50 etc. Ours is only 1/2in wide. The box will reboot. All units are bench tested and working before leaving the factory.

It will not work. Avoid returns: use only with cable boxes with an active ir in port labeled ir in or ext. Will not work with sa 4000hdc series, 8240/8260hdc box, and vms series not compatible with QP6xxx and QIP2500, also works with DTA271, 4250/HDC, or port on the back of any box stating Serial. Ir located on the back of the cable box. If the lbox is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box.

Do not buy to use with av stereo receivers, or smart tv, ir repeater block, s. Thinnest available! perfect size to blend into current flat screen frames. Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small. 53 wide x 1. 12 long x. 43in tall ir receiver with 9 ft lead to 3. 5mm gold stereo plug.
BrandInfrared Resources #ad
ManufacturerInfrared Resources LLC #ad
Height0.43 Inches
Length1.12 Inches
Weight0.08 Pounds
Width0.56 Inches
Part NumberIR1040
ModelIR1040

7. TNP Products

#ad

TNP Infrared Receiver Extender Cable 10FT, 38-56kHz Dual Band IR Sensor External Universal IR Receiver Extender Connector Extension Cord Wire Plug for IR Repeater Systems

#ad
TNP Products #ad - Compatible with tnp repeater extender infrared remote control hidden system Kit ASIN: B013318WFW, Center-Data, HDMI Extender Wall Plates; Tip-VCC 5V, Lower-Ground.

Support 38-56khz dual band ir frequency; works with all Universal Remotes and devices with an IR IN jack with compatible IR input tips. This ir receiver extender cable Is A Receiver Device For Use With Infrared Remote Controls. Plugs directly into the rear ir in port of the source Device or IR extender and serves as the IR sensor for remote control input. Allows you to hide your ir compatible devices behind closed doors in a cabinet or closet and at the same time handle all of the same functions as if your set top box was out in the open.
BrandTNP Products #ad
ManufacturerTNP Products #ad
Height2 Inches
Length4 Inches
Width3 Inches
Part NumberCBL_IR_A1329_3M

8. FlickerStar

#ad

Single Head Eye to 3.5mm Jack Red IR Transmitter Wire Cord Compatible with for IR Repeater Extender System Kit rectangle, FlickerStar IR Infrared Emitter Extender Extension Cable

#ad
FlickerStar #ad - Permanent customer service. It's also compatible with Xbox One, and IR Connecting Blocks and Home Automation controllers. Single ir emitter expansion cable compatible with 38khz devices. Note: these are transmitters, please refer to description.

Note: only eye have Stick, cable hidden, need to install and paste yourself. 1-year warranty. 3. 5mm monophonic jack to IR Emitter Mini Stick-On Eye. The ir emitter comes with adhesive backing sticks directly onto different devices. Ir emitter kit includes: 5 feet ir emitter cable x 1 and 5 feet Additional Extension cable x1. Work with infrared extender extension system, IR repeater extender system kit.

Note: transmitter cable is only a signal that spreads farther. If the product is not applicable, please contact us within 30 days for a full refund! The total cable length is about 10 feet, giving you more options for installation. If you have any questions, please contact us. This product is widely compatible, not receivers, but a small number of products may not be suitable.
BrandFlickerStar #ad
ManufacturerFlickerStar #ad

9. Supxing

#ad

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 20FT

#ad
Supxing #ad - Universal compatibility} with most a/v equipment with infrared sensors not rF; 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote. Remote control signal receiving real-time response to fast forward without delay. Home theater accessory} repeats the ir signal to a dvd player, stb box, receiver or other a/v source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.

Ir remote control} cable extends the signal to a video source like a blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmissionOperating range:20-60HZ. Usb powered ir }extension cable has an integrated 6 foot y-cable to receive 5v usb power; connect to an hdtv usb port or to a usb wall chargerTip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled.

The signals are not synchronized and will interfere with each other and cause them. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. Simple installation} of this lightweight ir cable; locate the ir blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting.
BrandSupxing #ad
ManufacturerSupxing #ad
Part Number8541713285
Model8541713285

10. MYPIN

#ad

60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc., 3ft 20KHz

#ad
MYPIN #ad - Passes ir communication-- used with an ir repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels. Great compatibility-- with 3.

5 mm jack connector, cable box, amplifier, stereo receiver, satellite tv receiver, dvd player, CD player, the universal ir cable is supportive for most of audio/video devices such as HDMI Extender, Blu-ray player or any other components which is controlled by IR signalNOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely.220-60khz range-- wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience.

High sensitivity sensor-- easily control DVD player or other HDMI source from remote position up to 10 ft3m. Plug and play-- comes with adhesive backing sticks directly onto different devices, applied to HDMI Extender; IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
BrandMYPIN #ad
ManufacturerMYPIN #ad